- November 15, 2019
- NEMA Communications
-
This piece was originally published in the November/December 2019 issue of electroindustry.
Philip Squair, Vice President of Government Relations, NEMA
It was a consequential summer for NEMA and the electroindustry on Capitol Hill. NEMA has advanced legislative proposals on surface transportation, industrial efficiency, appropriations, carbon monoxide detection, and cyber modernization of the grid.
Most recently, the U.S. Senate Environment and Public Works Committee passed a surface transportation bill that authorizes $1 billion over five years for a comprehensive build-out of the electric vehicle
Read More[...]
- November 13, 2019
- NEMA Communications
-
Clark Silcox, NEMA General Counsel
In the literature pertaining to energy conservation and Standards and codes, there is a concept known as Naturally-Occurring Market Adoption (NOMAD). This is defined to mean the proportion of energy savings that would have taken place in the market even if energy conservation Standards had not been adopted, and it represents an examination of trends based on market data. The NOMAD experience is highly relevant to what has already transpired and is continuing to transpire with
Read More[...]
- November 11, 2019
- NEMA Communications
-
This piece was originally published in the November/December 2019 issue of electroindustry.
Jonathan Stewart, Industry Director, NEMA Utility Systems Division, will participate in a workshop where he will give an overview of state and local regulatory activity related to sulfur hexafluoride at the DILO Gas Management Seminar in Tampa, Fla. on Nov. 13. Check out https://www.eiseverywhere.com/website/ 2145/agenda/ for details.
NEMA electroindustry experts are available to speak at your event. Need a speaker? Book a speaker at www.nema.org/book-a-speaker. ei
Read More[...]
- November 8, 2019
- NEMA Communications
-
This piece was originally published in the November/December 2019 issue of electroindustry.
Mark W. Wingate, President, Maxivolt Corporation
Mark W. Wingate is a serial entrepreneur and founder of Maxivolt Corporation. He is involved globally with Standards development and disruptive technology, has trained scores of people and authored numerous technical papers, and serves as an adviser to multiple boards and committees.
As Bob Dylan’s title track song from his 1964 record says, “The Times They Are a-Changin’.”
As a child of the ’60s, I loved
Read More[...]
- November 4, 2019
- NEMA Communications
-
This piece was originally published in the November/December 2019 issue of electroindustry.
Unless a washing machine is zapped or an overhead light fizzles out, most people don’t notice the electrical infrastructure at home or work that powers and enables their modern lives. Like an audience for a Broadway production, we’re dazzled by the actors in front of us, paying little attention to the stage crew that keeps the show moving behind the scenes.
Like Broadway stagehands, most of the electrical infrastructure in
Read More[...]
- November 1, 2019
- NEMA Communications
-
This piece was originally published in the November/December 2019 issue of electroindustry.
Daniel Abbate, Industry Director, Building Infrastructure Division, NEMA
Recent years have seen a significant increase in the number of do-it-yourself projects that homeowners will undertake. Home products and construction materials are easily accessible, and there are online tutorial videos for every installation imaginable. This includes the ground-fault circuit-interrupter (GFCI), which is designed to protect people from electric shock. It is important for all homeowners to understand that this type of
Read More[...]
- October 30, 2019
- NEMA Communications
-
“One thing about which fish know exactly nothing is water, since they have no anti-environment which would enable them to perceive the element they live in.” ― Marshall McLuhan, War & Peace in the Global Village (1968)
Joel Solis, Conformity Assessment Manager, NEMA
Today, there are two predominate types of power transmission and distribution systems that serve as the foundation of systems used throughout the developed world, i.e. the North American and European system. Visually distinguishing between the two is difficult since
Read More[...]
- October 30, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
At NEMA, our primary function is to develop Standards that help manufacturers and their customers readily adopt technologies while assuring safety, efficiency, reliability, and usability and anticipating future technology evolution.
For instance, the Industrial Internet of Things contains many different forms of technology that touch every manufacturer and nearly all of their products. Not only can producers better oversee factory processes, but they can gain valuable insights through data collection
Read More[...]
- October 28, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Fred Ashton, Economic Analyst, NEMA
The United States is among the top global suppliers of industrial automation equipment, with nearly $13.4 billion worth of exported equipment in 2018. In 2016, the United States was the third-largest global exporter of such equipment after China and Germany, according to the U.S. International Trade Administration (ITA).
The U.S. ITA defines industrial automation equipment as “the hardware and components used to automate factory floors across
Read More[...]
- October 25, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Ricardo Vazquez, Mexico Manager, NEMA and Craig Updyke, Director, Trade and Commercial Affairs, NEMA
As part of the new trade agreement between the United States, Mexico, and Canada, federal agencies will seek to harmonize their energy conservation Standards and test procedures for regulated products. With the goals of increasing energy efficiency and facilitating market access, the three national regulators are to endeavor to harmonize mandatory regulations over the first nine
Read More[...]
- October 23, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Craig Updyke, Director, Trade and Commercial Affairs, NEMA
As you read this, Congress should be moving forward with approval of legislation to implement the U.S.–Mexico–Canada Agreement (USMCA), negotiated by the Administration with our neighbors and partners in 2018 to modernize the North American Free Trade Agreement (NAFTA). Building on NAFTA, the USMCA contains a series of market access and cost-savings benefits for the U.S. electroindustry. (See related article on USMCA-driven
Read More[...]
- October 21, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Craig Updyke, Director, Trade and Commercial Affairs, NEMA
As U.S. and Chinese trade officials resumed negotiations in July over tariffs, technology, and protection of intellectual property, the U.S. Commerce Department’s Office of Standards and Investment Policy brought to light a paper by a unit of the Standardization Administration of China (SAC) on SAC’s engagement in and plans for international Standardization. Elements of the strategy include adoption and mutual recognition of
Read More[...]
- October 18, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Ann Brandstadter, Manager, Standards Publications and Marketing, NEMA
ANSI/NEMA MW 1000-2018, Magnet Wire, Magnet Wire contains specifications for round, rectangular, and square film-insulated and/or fibrous-covered copper and aluminum magnet wire generally used in the winding of coils for electrical apparatus. It includes definitions, type designations, dimensions, constructions, performance, and test methods for magnet wire.
This revised Standard includes updated specifications, test procedures, and requirements, as well as new definitions of terms
Read More[...]
- October 9, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Peter Weems, Senior Director of Policy & Strategy, MITA
Medical imaging devices allow healthcare providers to observe and analyze the anatomy and physiological functioning of patients without invasive surgery. MITA Member companies are responsible for the innovation, original design, manufacture, packaging, labeling, assembling, and upgrading of medical devices. Original equipment manufacturers also often provide servicing activities for installed devices— both their own and those initially manufactured by other companies.
Medical imaging
Read More[...]
- October 4, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Mike Stone, West Coast Field Representative, NEMA
The National Electrical Code® is revised every three years and the newest edition, the 2020 NEC, is scheduled to be published in September. The 2020 NEC will reflect the latest advances in electrical safety for both the public and electrical workers, as well as new technologies in the electroindustry.
NEMA and its Member companies are an integral part of this code development process. There
Read More[...]
- October 2, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Zach Tinkler, U.S. Key Accounts Channel Manager, Schneider Electric
Experiment, Test, and Grow
Don’t look at modernization as a huge undertaking. Break it into smaller steps addressing one piece of the facility at a time. Start by connecting one machine, then monitor the productivity and really look at the process insights that you gain from that connectivity. Now, connect another piece and grow from there. In our facility, we did exactly
Read More[...]
- October 1, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
The Internet of Things (IoT) is growing rapidly. By 2020 there will be nearly 30 billion IoT devices around the world1. The proliferation of these devices could pose a threat to the internet at large if companies have not taken appropriate cybersecurity measures to protect these devices. NEMA Members that manufacture connected products take their role in strengthening the cybersecurity of the products they manufacture very seriously. They are
Read More[...]
- September 30, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
RIght: John Caskey, Former NEMA VP of operations, presents Mark Gliebe with the EIC Golden Omega Award for his contributions to the electroindustry.
For 60 years, NEMA and the IEEE Electrical Insulation Conference have celebrated people who have contributed significantly to the field of science and technology. This year, NEMA had the honor of presenting the Golden Omega Award to NEMA Board of Governors Chair Mark Gliebe.
Gliebe has spent nearly
Read More[...]
- September 28, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.The Society for Standards Professionals (SES) presented its Emerging Professional Award to Muhammad Ali, AStd, Technical Program Manager for the NEMA Building Infrastructure Division. SES honored Ali for his distinguished contributions to the Standards
profession and for demonstrating leadership qualities among colleagues in the field.“This is a much-deserved award for Ali, recognizing the hard work and dedication he has put forth to advance Standards on behalf
Read More[...]
- September 27, 2019
- NEMA Communications
-
This piece was originally published in the September/October 2019 issue of electroindustry.
Dirk Schulz ABB Corporate Research, Ladenburg, Germany dirk.schulz@de.abb.com and Lars Simora Busch-Jaeger Elektro, Lüdenscheid, Germany lars.simora@de.abb.com
From automotive to commodity goods, mass customization has become state of the art in discrete manufacturing. In Industry 4.0 (the current trend of automation and data exchange in manufacturing technologies), one of the drivers of mass customization is to manufacture highly customized consumer goods in small batch sizes while also cutting costs. We’re literally
Read More[...]