Home | Site Map | Privacy Policy | Terms and Conditions | Advertise | Contact Us

Standards and Publications
  About NEMA Standards
  Codes and Standards Committee
  Engineering Bulletins
  Field Representative Program
  Forums
  International Activities
  International and Regional Standardization Co...
  NEMA Policies and Strategies
  Patent Disclosure Policy
  The ABCs of Conformity Assessment
  NTCIP
  Standards by Document Number
  Standards by Title
  Popular Acronyms
  Product Certification
  ANSI Z535 Safety Standards

email | print

Standards by Title

NEMA > Standards > Standards by Title  
- A

Standards: 1 to 100 out of 583


1  2  3  4  5  6  | next >

Title:Document Number:
Limits on Mercury Content in Self-ballasted Compact Fluorescent LampsLL8-2008
“Quality Control Manual” Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital MammographyXR 22-2006
“Quality Control Manual” Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-field Digital MammographyXR 23-2006
1.65-inch (42-mm) for Integral Reflector Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases—Dimensions and Centering SystemsANSI C78.1417-1997
100-Watt, M90 Single-Ended Metal Halide LampsANSI C78.1382-1996
1000-Watt, M47 Single-Ended Metal Halide LampsANSI C78.1376-1996
150-Watt, M102 Single-Ended Metal-Halide LampsANSI C78.1384-1997
1500-Watt, M48 Single-Ended Metal-Halide LampsANSI C78.1379-1997
160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide LampsANSI C78.1342-1990 (R1995) (ANSI copyright)
175-Watt, M57 Single-Ended Metal Halide LampsANSI C78.1377-1996
2007-DICOM-FULLSET[No Document Number]
250-Watt, M58 Single-Ended Metal Halide LampsANSI C78.1378-1997
250-Watt, M80 Double-Ended Metal Halide LampsANSI C78.1387-2001
3.0 kHz Insulation Continuity Proof Testing of Wire and CableWC 56-1986 (R2000, R2005)
34 Watt Fluorescent Lamps And High Frequency Electronic BallastsLSD 5-1999
400-Watt, M59 Single-Ended Metal Halide LampsANSI C78.1375-1996
450W Self-Ballasted Mercury LampsANSI C78.1340-1990 (R1995) (ANSI copyright)
5-46 KV Shielded Power Cable for Use in the Transmission and Distribution of Electric EnergyWC 74-2006/ICEA S-93-639
50-Watt, M110 Single-Ended Metal-Halide LampsANSI C78.1374-1996
70-Watt, M98 Single-Ended Metal Halide LampsANSI C78.1372-1997
750-Watt, 120-Volt Self-Ballasted Mercury LampsANSI C78.1341-1990 (R1995) (ANSI copyright)
A Brief Comparison of NEMA 250 and IEC 60529[No Document Number]
A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of DefinitionsLSD 10-2000
A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems OptionsLSD 31-2005
A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High Performance Wire and Cable ApplicationsWC 65-1995 (R2003)
AC Overload Test for Film Insulated Magnet WireMW 790-2000
AC Vacuum-Break Magnetic Controllers Rated 1500 Volts ACICS 2, Part 9-2002 (R 2007)
Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging DevicesMS 4-2006
Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3UD 2-2004
Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive SystemsANSI/NEMA ICS 61800-1-2002 (R2007)
Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements--Rating Specifications for Low Voltage Adjustable Frequency A.C. Power Drive SystemsICS 61800-2-2005
Adjustable Speed Electrical Power Drive Systems: Part 4: General Requirements--Rating Specifications for A.C. Power Drive Systems Above 1000 V A.C. and not Exceeding 35 kVICS 61800-4-2004
Alternating-Current High-Voltage Circuit BreakersSG 4-2000 (R2005)
Alternating-Current High-Voltage Power Vacuum Interrupters—Safety Requirements for X-Radiation LimitsANSI C37.85-2002
Alternatives to Mercury-Containing Light Sources[No Document Number]
American National Standard for Composite Suspension Insulators for Overhead Transmission Lines—TestsANSI C29.11-1989 (R1996)
American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper ConductorsANSI C119.4-2004
American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper ConductorsANSI C119.6-2006
American National Standard for Electric Connectors—Sealed Insulated Underground Connector Systems Rated 600 VoltsANSI C119.1-2006
American National Standard for Electric LampholdersANSI/ANSLG C81.62-2007
American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw BasesANSI C78.20-2003
American National Standard for Electric Lamps—Amendments to ANSI C78.370-1997 and ANSI C78.390-1998ANSI C78.370_390lcd-2002
American National Standard for Electric Lamps—Characteristics of Miniature Lamps of T1 and T1 3/4 ShapesANSI C78.391-2004
American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector LampsANSI C78.379-2006
American National Standard for Electric Lamps—Discharge Lamps (Excluding Fluorescent Lamps)—Safety SpecificationsANSI/IEC C78.62035-2004
American National Standard for Electric Lamps—High Intensity Discharge—Methods of Measuring CharacteristicsANSI C78.389-2004
American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of DesignationANSI/ANSLG C78.380-2007
American National Standard for Electric Lamps—High-Intensity Discharge Lamps, Method of Designation (Amendment)ANSI C78.380a-2004
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting PurposesANSI/ANSLG C78.60432:1-2007
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting PurposesANSI/ANSLG C78.60432:2-2007
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications—Part 3: Tungsten Halogen Lamps (non vehicle)ANSI/ANSLG C78.60432:3-2007
American National Standard for Electric Lamps—PAR and R ShapesANSI C78.21-2003
American National Standard for Electric Lamps—Projection Lamps—VocabularyANSI C78.1452-2004
American National Standard for Electric Lamps—Single-Ended Metal Halide LampsANSI/ANSLG C78.43-2007
American National Standard for Electric Lamps—Specifications for Fluorescent Lamp StartersANSI C78.180-2003
American National Standard for Electric Lamps—Specifications for Performance of Self-ballasted Compact Fluorescent LampsANSI C78.5-2003
American National Standard for Electric Lamps--Double-Capped Fluorescent Lamps--Dimensional and Electrical CharacteristicsANSI/IEC C78.81-2005
American National Standard for Electric Rigid Steel Conduit (ERSC)ANSI C80.1-2005
American National Standard for Electrical Lamp Bases--Specifications for Bases (Caps) for Electric LampsANSI/ANSLG C81.61-2007
American National Standard for Electrical Power Systems and Equipment—Voltage Ratings (60 Hertz)ANSI C84.1-2006
American National Standard for Electrical Rigid Aluminum Conduit (ERAC)ANSI C80.5-2005
American National Standard for Insulators—Composite Suspension TypeANSI C29.12-1997 (R2002)
American National Standard for Insulators—Composite-Distribution Deadend TypeANSI C29.13-2000
American National Standard for Insulators—Composite-Distribution Line Post TypeANSI C29.18-2003
American National Standard for Insulators—Composite-Line Post TypeANSI C29.17-2002
American National Standard for Insulators—Wet-Process Porcelain and Toughened Glass—Suspension TypeANSI C29.2-1992 (R1999)
American National Standard for Intermediate Metal Conduit (EIMC)ANSI C80.6-2005
American National Standard for lamp ballasts - Low Frequency Square Wave Electronic Ballasts -- for Metal Halide LampsANSI/ANSLG C82.14-2006
American National Standard for Lamp Ballasts—Fluorescent AdaptersANSI C82.12-1999
American National Standard for Physical Aspects of Watthour Meters—Safety StandardANSI C12.10-2004
American National Standard for Polyphase Induction Motors for Power Generation StationsANSI C50.41-2000
American National Standard for Portable Rechargeable Cells and Batteries—General and SpecificationsANSI C18.2M, Part 1-2007
American National Standard For Product Safety Information in Product Manuals, Instructions, and Other Collateral MaterialsANSI Z535.6-2006
American National Standard For Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge LampsANSI C136.14-2004
American National Standard for Roadway and Area Lighting Equipment—Enclosed Architectural LuminairesANSI C136.23-2006
American National Standard for Roadway and Area Lighting Equipment—Enclosed Setback Luminaires and Directional Floodlights for High-intensity Discharge LampsANSI C136.32-2006
American National Standard for Roadway and Area Lighting Equipment—Enclosed Side-mounted Luminaires for Horizontal-burning High-intensity Discharge Lamps—Mechanical Interchangeability of RefractorsANSI C136.17-2005
American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top-Mounted LuminairesANSI C136.16-2004
American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for SelectionANSI C136.1-2004
American National Standard for Roadway and Area Lighting Equipment—Film CutoutsANSI C136.5-2003
American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in LuminairesANSI C136.28-2006
American National Standard For Roadway and Area Lighting Equipment—High-intensity Discharge and Low-pressure Sodium Lamps in Luminaires—Field IdentificationANSI C136.15-2004
American National Standard for Roadway and Area Lighting Equipment—High-mast Side-mounted Luminaires for Horizontal- or Vertical-burning High-intensity Discharge LampsANSI C136.18-2006
American National Standard for Roadway and Area Lighting Equipment—High-pressure Sodium and Retrofit High-pressure Sodium Lamps for Mercury Ballasts—Guide for SelectionANSI C136.19-2004
American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of LuminairesANSI C136.22-2004
American National Standard for Roadway and Area Lighting Equipment—Locking-type Photocontrol Devices and Mating Receptacles—Physical and Electrical Interchangeability and TestingANSI C136.10-2006
American National Standard for Roadway and Area Lighting Equipment—Luminaire AttachmentsANSI C136.3-2005
American National Standard for Roadway and Area Lighting Equipment—Luminaire Voltage ClassificationANSI C136.2-2004
American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for SelectionANSI C136.12-2004
American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood PolesANSI C136.13-2004
American National Standard for Roadway and Area Lighting Equipment—Metal Heads and Reflector Assemblies—Mechanical and Optical InterchangeabilityANSI C136.6-2004
American National Standard for Roadway and Area Lighting Equipment—Multiple SocketsANSI C136.11-2006
American National Standard for Roadway and Area Lighting Equipment—Nonlocking (Button) Type PhotocontrolsANSI C136.24-2004
American National Standard for Roadway and Area Lighting Equipment—Socket Support Assemblies for Metal Heads—Mechanical InterchangeabilityANSI C136.9-2003
American National Standard for Roadway and Area Lighting Equipment—Trouble-shooting Guide for High-pressure Sodium LuminairesANSI C136.26-2003
American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting LuminairesANSI C136.34-2004
American National Standard for Roadway and Area Lighting Equipment—Vertical Tenons Used with Post Top-mounted LuminairesANSI C136.21-2004
American National Standard for Roadway and Area Lighting Equipment--Tunnel and Underpass Lighting LuminairesANSI C136.27-2005
American National Standard for Roadway and Area Lighting—Plug-in Type Receptacle and Plug for High-intensity Discharge IgnitorsANSI C136.33-2005
American National Standard for Safety ColorsANSI Z535.1-2006

 

1  2  3  4  5  6  | next >