FB 2.20-2014 |
Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable |
Technical Revision |
Abbate, Daniel |
2021-06-30 |
|
|
ANSI/MITA SAC 1-2020 |
American National Standard for Supplier Credentialing in Healthcare |
Technical Revision |
Cucinotta, Eileen |
|
Published |
|
MS 9-2008 (R2020) |
Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 3-2008 (R2020) |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 1-2008 (R2020) |
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 6-2008 (R2020) |
Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel, Non-Volume Coils in Diagnostic Magnetic Resonance Imaging |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 2-2008 (R2020) |
Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images |
Reaffirmation |
Cucinotta, Eileen |
|
Published |
|
MS 12-2016 |
Qualifications and Mapping of Geometric Distortion for Special Applications |
Technical Revision |
Cucinotta, Eileen |
2021-12-31 |
|
|
NEMA IIC 1 v02a-2020 |
Digital Imaging and Communications in Security Information Object Definitions (IODs) |
Technical Revision |
Doherty, Brian |
2021-01-18 |
|
|
TS 5-2021 |
Portable Traffic Signal Systems (PTSS) Standard |
Technical Revision |
Doherty, Brian |
2021-08-31 |
|
|
RSU Standard |
RSU v01, Roadside Unit (RSU) Standard |
New |
Doherty, Brian |
2021-07-30 |
|
|
TS 2-2021 |
Traffic Controller Assemblies with NTCIP Requirements—Version 03.07 |
Technical Revision |
Doherty, Brian |
|
Published |
|
NEMA BIM 100-2021 |
BIM Data Requirements for Electrical Products in support of Design, Construction, Operation and Maintenance |
New |
Erbesfeld, Michael |
2021-08-31 |
|
|
ANSI C137.6-2021 |
Data Tagging Vocabulary (Semantic Model Elements) for Interoperability of Lighting Systems |
New |
Erbesfeld, Michael |
2021-06-27 |
|
|
NEMA BL 3-2013 (R2021) |
Dimming Ballast Energy Performance |
Reaffirmation |
Erbesfeld, Michael |
2021-09-01 |
|
|
ANSI C78.62035-2016 |
Discharge Lamps (excluding fluorescent lamps) - Safety Specifications |
Revision |
Erbesfeld, Michael |
2021-07-07 |
|
|
ANSI C78.1408-2004 (S2020) |
Electric Lamps – CBA Projection Lamp |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-01-01 |
|
|
ANSI C78.391-2004 (R2016) |
Electric Lamps - Characteristics of Subminiature Lamps of T1 and T1-3/4 Shapes |
Reaffirmation |
Erbesfeld, Michael |
2021-01-06 |
|
|
ANSI C78.1407-2004 (S2020) |
Electric Lamps – Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps - Dimensions |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-01-01 |
|
|
ANSI C78.1406-2004 (S2020) |
Electric Lamps – P28 Single-Contact Medium Prefocus Based Projection Lamps for Base-Down Operation - Dimensions |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-01-01 |
|
|
ANSI C78.LL3-2003 (S2020) |
Electric Lamps - Procedures for High Intensity Discharge Lamp - Sample Preparation and the Toxicity Characteristic Leaching Procedure |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-01-01 |
|
|
NEMA BL 2-2009 |
Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps |
Rescission |
Erbesfeld, Michael |
2021-08-31 |
|
|
ANSI C137.5-2021 |
Energy Reporting Requirements for Lighting Devices |
New |
Erbesfeld, Michael |
2021-06-27 |
|
|
ANSI C78.41-2016 |
High-Intensity Discharge Lamps - Low Pressure Sodium Lamps |
Rescission |
Erbesfeld, Michael |
2021-08-23 |
|
|
ANSI C78.42-2009 (R2016) |
High-Pressure Sodium Lamps |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-02-26 |
|
|
ANSI C82.15-2021 |
LED Driver Robustness |
New |
Erbesfeld, Michael |
2021-10-13 |
|
|
ANSI C82.2-2002 (S2021) |
Method of Measurement of Fluorescent Lamp Ballasts |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-11-30 |
|
|
ANSI C78.62717-2018 |
NAIS - Adoption of IEC 62717 |
Revision |
Erbesfeld, Michael |
2021-07-01 |
|
|
ANSI C137.7-2020 |
Networked Open Parking Lot Lighting Systems |
New |
Erbesfeld, Michael |
2021-04-08 |
|
|
SSL-7A-2015 (R2021) |
Phase-Cut Dimming for Solid State Lighting: Basic Compatibility |
Reaffirmation |
Erbesfeld, Michael |
2021-06-02 |
|
|
NEMA LS 20000-2021 |
Physical Interface Of Luminaire Integrated Control Devices |
New |
Erbesfeld, Michael |
2021-12-01 |
|
|
ANSI C78.LL1256-2003 (S2020) |
Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching procedure |
Stabilized Maintenance |
Erbesfeld, Michael |
2021-01-01 |
|
|
ANSI C78.1431-1997 (R2016) |
Slide Projection Lamps, Condensing, Dichroic,Two-inch (51 mm) Integral-Reflector, Rim Reference TH Lamps with GY5.3 Bases |
Reaffirmation |
Erbesfeld, Michael |
2021-03-02 |
|
|
ANSI C78.180-2003 (R2016) |
Specifications for Fluorescent Lamp Starters |
Reaffirmation |
Erbesfeld, Michael |
2021-06-29 |
|
|
ANSI C78.40-2016 |
SPECIFICATIONS FOR MERCURY LAMPS |
Revision |
Erbesfeld, Michael |
2021-07-07 |
|
|
ANSI C78.682-1997 (R2016) |
Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps |
Reaffirmation |
Erbesfeld, Michael |
2021-07-01 |
|
|
NEMA 100-2021 |
Wire Insulation Colors for Lighting Systems |
New |
Erbesfeld, Michael |
2021-04-30 |
|
|
TC 14.AG-2015 (R2021) |
Aboveground Reinforced Thermosetting Resin Conduit and Fittings |
Reaffirmation |
Granata, Casey |
2021-09-01 |
|
|
ANSI C80.1-2020 |
American National Standard for Electric Rigid Steel Conduit (ERSC) |
Technical Revision |
Granata, Casey |
2021-03-15 |
|
|
ANSI C80.3-2020 |
American National Standard for Electrical Metallic Tubing—Steel (EMT-S) |
Technical Revision |
Granata, Casey |
2021-03-18 |
|
|
ANSI C80.5-2020 |
American National Standard for Electrical Rigid Metal Conduit—Aluminum (ERMC-A) |
Technical Revision |
Granata, Casey |
2021-03-15 |
|
|
BSR/NEMA 250-202X |
Enclosures for Electrical Equipment (1,000 Volts Maximum) |
Technical Revision |
Granata, Casey |
2021-10-01 |
|
|
TC 14.XW-2015 (R2021) |
Extra Heavy Wall Aboveground Reinforced Thermosetting Resin Conduit and Fittings |
Reaffirmation |
Granata, Casey |
2021-09-01 |
|
|
ANSI/NEMA 50004 (FB1) |
Fittings, Case Metal Boxes, and Conduit Bodies for Conduit & Cable Assemblies |
Reaffirmation |
Granata, Casey |
2021-12-31 |
|
|
CANENA Metal Cable Trays |
Metal Cable Trays |
New |
Granata, Casey |
2021-12-31 |
|
|
CANENA Non Metallic Cable Trays |
Non-Metallic Cable Trays |
New |
Granata, Casey |
2021-12-31 |
|
|
TC 3-2021 |
Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing |
Technical Revision |
Granata, Casey |
2021-12-31 |
|
|
TC 7-2021 |
Smooth Wall Coilable Polyethylene Electrical Plastic Duct |
Technical Revision |
Granata, Casey |
2021-12-31 |
|
|
NEMA IIC 1 v02A-202X |
Digital Imaging and Communications in Security Information Object Definitions (IODs) |
Technical Revision |
Griffith, Steve |
2021-11-30 |
|
|
XR 31 2016 |
“Quality Control Tools for Digital Projection Radiography” |
Reaffirmation |
Hornberger, Zack |
2021-12-31 |
|
|
MW 750-2020 |
Coefficient of Friction of FIlm Insulated Magnet Wire |
Revision |
Leibowitz, Mike |
2021-02-11 |
|
|
ICS 5-2016 |
Control-Circuit and Pilot Devices |
Technical Revision |
Leibowitz, Mike |
2021-12-31 |
|
|
MG 10-2016 |
Energy Management Guide for Selection and Use of Polyphase Motors |
Reaffirmation |
Leibowitz, Mike |
2021-12-31 |
|
|
XW 1000 |
Extruded Insulated Magnet Wire |
New |
Leibowitz, Mike |
2021-06-24 |
|
|
ICS 6-1993 (R2001, R2006, R2011, R2016) |
Industrial Control & Systems Enclosures |
Reaffirmation |
Leibowitz, Mike |
2021-12-31 |
|
|
ICS 15-2011 R2016 |
Instructions for the Handling, Installation, Operation, and Maintenance of Electric Fire Pump Controllers Rated Not More than 600 V |
Reaffirmation |
Leibowitz, Mike |
2021-12-31 |
|
|
ICS 15.1-2021 |
Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated no more than 7200V |
Technical Revision |
Leibowitz, Mike |
2021-08-26 |
|
|
ANSI/NEMA MW 1000-2020 |
Magnet Wire |
Technical Revision |
Leibowitz, Mike |
2021-04-30 |
|
|
CANENA THSC 121B-61439: UL 845 - CSA C22.2 No. 254 - NMX-J-353-ANCE |
Motor Control Centers |
Technical Revision |
Leibowitz, Mike |
2021-06-28 |
|
|
MG 1-2016 |
Motors and Generators |
Technical Revision |
Leibowitz, Mike |
2021-12-31 |
|
|
ANSI C50.41 |
Polyphase Induction Motors for Power Generating Stations |
Reaffirmation |
Leibowitz, Mike |
2021-03-31 |
|
|
ICS 1.3-1986 (R2015, R2020) |
Preventive Maintenance of Industrial Control and Systems Equipment |
Reaffirmation |
Leibowitz, Mike |
2021-04-15 |
|
|
MW 780-2005 (R2011, R2016) |
Returnable Packagng for 24 x 6 Magnet Wire Reels" |
Reaffirmation |
Leibowitz, Mike |
2021-12-31 |
|
|
ICS 1.1-1984 (R2015, R2020) |
Safety Guidelines for the Application, Installation and Maintenance of Solid State Control |
Reaffirmation |
Leibowitz, Mike |
2021-04-15 |
|
|
MW 785-2021 |
Simulated Insertion Force Test for Film Insulated Magnet Wire |
Technical Revision |
Leibowitz, Mike |
2021-08-31 |
|
|
MG 3-2021 |
Sound Level Prediction for Installed Rotating Electrical Machines |
Reaffirmation |
Leibowitz, Mike |
2021-10-04 |
|
|
ICS 2-2000 (R2005 R2020) |
Starters, Contactors & Overload Relays, Rated not More Than 2000 Volts AC or 750 Volts DC |
Reaffirmation |
Leibowitz, Mike |
2021-04-15 |
|
|
SB 10-2016 |
Audio Standard for Nurse Call Stations |
Revision |
Marchionini, Brian |
2021-12-31 |
|
|
ANSI/NEMA C37.54-201x |
Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear - Conformance Test Procedures |
Reaffirmation |
Marchionini, Brian |
2021-01-11 |
|
|
CANENA CSA No. 62477-1 / UL 62477-1 |
Safety requirements for power electronic converter systems and equipment |
New |
Marchionini, Brian |
2021-12-31 |
|
|
CANENA CSA no. 62040-1 / UL 62040-1 |
Uninterruptible power systems (UPS) - Part 1: Safety requirements |
New |
Marchionini, Brian |
2021-12-31 |
|
|
RV 4 2016 |
Application Guidelines for Service-Entrance Cable |
Revision |
Masri, Khaled |
2021-12-31 |
|
|
ANSI/NEMA/IEC 60974-3, edition 4 |
Arc Striking and Stabilizing Devices |
Technical Revision |
Masri, Khaled |
2021-04-01 |
|
|
ANSI ICEA S-107-704-2021 |
Broadband Buried Service Wire, Filled, Polyolefin Insulated, Copper Conductor |
Technical Revision |
Masri, Khaled |
2021-08-30 |
|
|
ANSI ICEA S-107-704-2021 |
Broadband Buried Service Wire, Filled, Polyolefin Insulated, Copper Conductor. |
Technical Revision |
Masri, Khaled |
2021-07-27 |
|
|
ANSI/ICEA S-92-675-2021 |
Coaxial and Coaxial/Twisted Pair Composite Aerial Service Wires… |
Technical Revision |
Masri, Khaled |
2021-08-23 |
|
|
ANSI/ICEA S-91-674-2021 |
Coaxial And Coaxial/Twisted Pair Hybrid Buried Service Wires Technical Requirements |
Technical Revision |
Masri, Khaled |
2021-08-11 |
|
|
ANS/ICEA P-124-736 |
Code Words for 600V Underground Distribution Cable |
New |
Masri, Khaled |
2021-12-30 |
|
|
ANSI/ICEA P-127-737 |
Code Words for Overhead Aluminum Covered Conductors and 600 Volt Overhead Cables |
New |
Masri, Khaled |
2021-12-30 |
|
|
NEMA EW 1-1988 (R2019) |
Electric Arc-Welding Power Sources |
Reaffirmation |
Masri, Khaled |
2021-06-01 |
|
|
ANSI/NEMA HP 3-2021 |
Electrical & Electronic PTFE (Polytetrafluoro Ethylene) Insulated High Temperature Hook-Up Wire Types 600 V, EE 1000 V, ET 250 V |
Technical Revision |
Masri, Khaled |
2021-06-01 |
|
|
ANSI/NEMA HP 8-2021 |
Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105?C; 600 V), ZHDM (rated 90?C; 600 V), ZHDH (rated 90?C; 600 V), ZH (rated 125?C; 600 V), and ZHX (rated 125?C; 1000 V) |
Technical Revision |
Masri, Khaled |
2021-05-31 |
|
|
ANSI/NEMA HP 5-2021 |
Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125?C Hook-Up Wire, Types L (600 V), LL (1000 V), and LX (3000 V) |
Technical Revision |
Masri, Khaled |
2021-05-31 |
|
|
ANSI/NEMA HP 5 |
Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook-Up Wire, Types L (600 V), LL (1000 V), and LX (3000 V) |
Technical Revision |
Masri, Khaled |
2021-05-31 |
|
|
ANSI/NEMA HP 9 (R2013, 2021) |
Electrical and Electronic Ethylene-Propylene Diene Elastomer (EPDM) Insulated Hook-Up Wire, Types EP (Rated 125°C; 600 V) and EPD (Rated 125°C; 5000 V) |
Reaffirmation |
Masri, Khaled |
2021-03-31 |
|
|
ANSI NEMA HP 4-2021 |
Electrical and Electronic FEP (Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt), and KK (1000 Volt) |
Technical Revision |
Masri, Khaled |
2021-06-01 |
|
|
NEMA HP 7-2011 (R2021) |
Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook-Up Wire, Types B, C, D, BN, CN, and DN (600, 1000, and 3000 V), and Types J and JN 75ºC (600V) |
Reaffirmation |
Masri, Khaled |
2021-06-30 |
|
|
ANS/NEMA HP 6-2021 |
Electrical and Electronic Silicone and Silicone Braided Insulated, Hook-Up Wire, Types S (600 V), ZHS (600 V), SS (1000 V), ZHSS (1000 V), SSB Braided (1000V) and ZHSSB Braided (1000 V) |
Technical Revision |
Masri, Khaled |
2021-09-02 |
|
|
NMX-J-770-ANCE/CSA C 22.2 No. 341/UL 1426 |
Electrical Cables for Boats Standard |
New |
Masri, Khaled |
2021-12-31 |
|
|
NMX-J-436-ANCE/CSA C22.2 No. 49/UL 62 |
Flexible Cords and Cables |
Revision |
Masri, Khaled |
2021-03-31 |
|
|
ANSI ICEA S-130-760-2021 |
ICEA Standard For Broadband Twisted Pair Cable Filled And Unfilled, Polyolefin Insulated, Copper Conductor |
New |
Masri, Khaled |
2021-07-22 |
|
|
ANSI/ICEA S-99-689-2012 |
ICEA STANDARD FOR BROADBAND TWISTED PAIR CABLE FILLED, POLYOLEFlN INSULATED, COPPER CONDUCTOR TECHNICAL REQUIREMENTS |
Rescission |
Masri, Khaled |
2021-07-28 |
|
|
ANSI/ICEA S-84-608-2017 (R2021) |
ICEA Standard For Telecommunications Cable Filled, Polyolefln Insulated, Copper Conductor Technical Requirements (reaffirmation of ANSI/ICEA S-84-608-2017) |
Reaffirmation |
Masri, Khaled |
2021-09-17 |
|
|
Non-NEMA Standards (NEW) |
ISO/IEC 22603-1, Information technology — Digital representation of product information — Part 1: General |
New |
Masri, Khaled |
2021-08-11 |
|
|
ANSI/NEMA/IEC 60974-2 |
Liquid Cooling Systems |
Technical Revision |
Masri, Khaled |
2021-03-01 |
|
|
NMX-J-726-ANCE/UL 1569 |
Metal-Clad Cables |
Revision |
Masri, Khaled |
2021-12-31 |
|
|
ANSI C18.3M, Part 2-2021 |
Portable Lithium Primary Cells and Batteries—Safety Standard |
Revision |
Masri, Khaled |
2021-03-31 |
|
|
ANSI C18.2M, Part 2-2021 |
Portable Nickel Rechargeable Cells and Batteries--Safety Standard |
Revision |
Masri, Khaled |
2021-03-31 |
|
|
ANSI C18.1M, Part 1-2021 |
Portable Primary Cells and Batteries With Aqueous Electrolyte - General and Specifications (revision of ANSI C18.1M, Part 1-2015) |
Technical Revision |
Masri, Khaled |
2021-03-31 |
|
|
ANSI/NEMA WC 70/ICEA S-95-658-2021 |
Power Cables Rated 2000 Volts Or Less For The Distribution Of Electric Energy |
New |
Masri, Khaled |
2021-05-31 |
|
|
NEMA WC 62-1992 (R1999, R2004, R2021) |
Repeated Spark/Impulse Dielectric Testing |
Reaffirmation |
Masri, Khaled |
2021-07-31 |
|
|
NEMA WC 62-1992 (R1999, R2004, R2021) |
Repeated-Spark/Impulse Dielectric Testing |
Reaffirmation |
Masri, Khaled |
2021-09-10 |
|
|
NEMA EW 3 (R2014, 2020) |
Semiautomatic Wire Feed Systems for Arc Welding |
Reaffirmation |
Masri, Khaled |
2021-04-02 |
|
|
ANSI/ICEA S-90-661-2021 |
Standard for Category 3, 5, and 5e Individually Unshielded Twisted Pair Indoor Cables (With or Without an Overall Shield) for Use in General Purpose and LAN Communication Wiring Systems Technical Requirements |
Technical Revision |
Masri, Khaled |
2021-08-10 |
|
|
ANSI ICEA S-118-746-2021 |
Standard for Category 8, 100 Ohm, Indoor Cables for use in LAN Communication Wiring Systems |
New |
Masri, Khaled |
2021-09-30 |
|
|
ANSI/ICEA S-94-649-2021 |
Standard for Concentric Neutral Cables Rated 5 Through 46 kV |
Technical Revision |
Masri, Khaled |
2021-03-31 |
|
|
NEMA HP 75 |
Standard for Controlled Impedance in Internal Electrical Cable. |
Technical Revision |
Masri, Khaled |
2021-10-31 |
|
|
ANSI ICEA S-119-741-2021 |
Standard For Fiber To The Antenna (FTTA) Optical Fiber Cable |
Technical Revision |
Masri, Khaled |
2021-06-18 |
|
|
ANSI/NEMA WC 55021-2021 |
Standard for Military Internal Electrical Cable |
Technical Revision |
Masri, Khaled |
2021-09-30 |
|
|
ANSI/ICEA S-112-718-2021 |
Standard for Optical Fiber Cable for Placement in Sewer Environments |
Technical Revision |
Masri, Khaled |
2021-04-30 |
|
|
ANSI/NEMA WC 67-2015 (R2021) |
Standard for Uninsulated Conductors— Used in Electrical and Electronic Applications |
Reaffirmation |
Masri, Khaled |
2021-09-10 |
|
|
ANSI/NEMA WC 67-2015 (R2021) |
Standard for Uninsulated Conductors— Used in Electrical Applications |
Reaffirmation |
Masri, Khaled |
2021-09-30 |
|
|
ANSI/ICEA S-85-625-2016 (R2021) |
Telecommunications Cable Aircore, Polyolefin Insulated, Copper Conductor Technical Requirements |
Reaffirmation |
Masri, Khaled |
2021-08-23 |
|
|
ANSI/ICEA T-28-562-2021 |
Test Method for Measurement of Hot Creep of Polymeric Insulations |
Technical Revision |
Masri, Khaled |
2021-05-30 |
|
|
ANSI/NEMA/IEC 60974-7 |
Torches |
Technical Revision |
Masri, Khaled |
2021-03-31 |
|
|
ANSI/NEMA/IEC 60974-5 |
Wire Feeders |
Technical Revision |
Masri, Khaled |
2021-03-31 |
|
|
NTEP Publication 14 |
Electric Vehicle Fueling Systems Checklists • Test Procedures |
Technical Revision |
Moldoveanu, Andrei |
2021-07-01 |
|
|
ANSI/NEMA SM31000-2-2021 (ESM1-2) |
Electrical Submeter - Active Energy Accuracy |
New |
Moldoveanu, Andrei |
2021-08-30 |
|
|
NEMA BS 31001 - 2021 (ESM 2) |
Electrical Submeter System Commissioning |
Technical Revision |
Moldoveanu, Andrei |
2021-05-28 |
|
|
ESM1-2 2019 |
Electrical Submeter—Active Energy Accuracy |
Rescission |
Moldoveanu, Andrei |
2021-12-17 |
|
|
ESM1-1 2019 |
Electrical Submeter—General Requirements |
Withdrawal |
Moldoveanu, Andrei |
2021-12-15 |
|
|
ANSI/NEMA SM 31000-1 (ESM1-1) |
Electrical Submeter—General Requirements |
New |
Moldoveanu, Andrei |
2021-08-13 |
|
|
WD 1-1999 (R2015)(R2020) |
General Color Requirements for Wiring Devices |
Reaffirmation |
Moldoveanu, Andrei |
2021-04-19 |
|
|
WD 50000 (former WD10) |
High Ambient Temperature Testing |
New |
Moldoveanu, Andrei |
2021-06-30 |
|
|
UC 2-1993 (R2016) |
Undercarpet Power Distribution Systems |
Rescission |
Moldoveanu, Andrei |
2021-03-03 |
|
|
C29.14B |
Composite Insulators Guy Insulator Type (Uncoated or Painted Type) |
New |
Orr, Paul |
2021-10-14 |
|
|
ANSI C12.32 2021 |
DC Metering |
New |
Orr, Paul |
2021-04-09 |
|
|
C12.1 |
Electric Meters— Code for Electricity Metering |
Editorial Revision |
Orr, Paul |
2021-07-31 |
|
|
ANSI C12.9-2014 (R202x) |
Test Switches for Transformer-Rated Meters |
Reaffirmation |
Orr, Paul |
2021-09-30 |
|
|
ANSI C12.8-1981 (R2021) |
Watthour Meters, Test Blocks and Cabinets for Installation of Self-Contained “A” Base |
Reaffirmation |
Orr, Paul |
2021-09-19 |
|
|
is2.7 |
Programmable Controllers (PLC), Part 7: Fuzzy Control Programming |
Reaffirmation |
Richmond, David |
|
Published |
|
NEMA ICS 7-2020 |
Adjustable Speed Drives_ |
Technical Revision |
Richmond, David |
|
Published |
|
ANSI C136.45-2011 (R2016, S2021) |
Aluminum Lighting Poles |
Stabilized Maintenance |
Richmond, David |
|
Published |
|
TC 14.BG-2015 (R2020) |
Belowground Reinforced Thermosetting Resin Conduit and Fittings |
Reaffirmation |
Richmond, David |
2021-03-01 |
|
|
ANSI C136.23-2021 |
Enclosed Architechual Luminaires_ |
Technical Revision |
Richmond, David |
|
Published |
|
C136.50-2021 |
Energy Measurement within a Locking-Type Control Device |
New |
Richmond, David |
|
Published |
|
ANSI C136.20-2012(R2021) |
Fiber Reinforced Composite (FRC) Lighting Poles_ |
Reaffirmation |
Richmond, David |
|
Published |
|
ANSI C136.50-2021 |
For Roadway and Area Lighting Equipment - Energy Measurement for a Network Lighting Control (NLC) Device with Locking Type Receptacle |
New |
Richmond, David |
|
Published |
|
NEMA LL 10-2020 |
LED Replacements for HID Lamps: Equivalency Claims |
New |
Richmond, David |
|
Published |
|
ANSI C136.13-2020 |
Metal Brackets for Wood Poles_ |
Technical Revision |
Richmond, David |
|
Published |
|
C136.52-2021 |
Metering Performance Requirements for LED Drivers with Integral Energy Measurement |
New |
Richmond, David |
|
Published |
|
C136.11-2011 (R2016,S2021) |
Multiple Sockets |
Stabilized Maintenance |
Richmond, David |
|
Published |
|
ANSI C136.49-2021 |
Plasma Lighting |
Technical Revision |
Richmond, David |
|
Published |
|
TC 3-2015 |
Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing |
Technical Revision |
Richmond, David |
|
Published |
|
NEMA ICS 61131-1-2005 (R2013) |
Programmable Controllers (PLC), Part 1: General Information |
Reaffirmation |
Richmond, David |
|
Published |
|
NEMA ICS 61131-1-2003(R32013R2021) |
Programmable Controllers (PLC), Part 1: General Information_ |
Reaffirmation |
Richmond, David |
|
Published |
|
NEMA IA 2.7-2012 (R2021) |
Programmable Controllers (PLC), Part 7: Fuzzy Control Programming_ |
Reaffirmation |
Richmond, David |
|
Published |
|
NEMA 61131-1 |
Programmable Controllers, Part 1: General Information |
Reaffirmation |
Richmond, David |
|
Published |
Yes |
TC 7-2016 |
Smooth Wall Coilable Polyethylene Electrical Plastic Duct |
Technical Revision |
Richmond, David |
|
Published |
|
ANSI C136.47-2010 (R2015) |
Steel Lighting Poles |
Reaffirmation |
Richmond, David |
|
Published |
|
ANSI C136.47-2010 (R2015,S2021)) |
Steel Lighting Poles_ |
Stabilized Maintenance |
Richmond, David |
|
Published |
|
ANSI C136.27-2021 |
Tunnel Lighting and Underpass Luminaires_ |
Technical Revision |
Richmond, David |
|
Published |
|
ANSI C136.34-2020 |
Vandal Resistant Shields_ |
Technical Revision |
Richmond, David |
|
Published |
|