| VE 1-2017 / CSA C22.2 No. 126.1 |
Metal Cable Tray Systems (replaces VE 1-1991) |
Technical Revision |
Tong, Zijun |
|
Published |
|
| ICS 7-2012 |
Adjustable-Speed Drives |
Technical Revision |
Richmond, David |
2017-12-31 |
|
|
| ANSI C136.17-2005 (R2010, S2017) |
Enclosed Side-mounted Luminaires for Horizontal -burning High Intensity Discharge Lamps Mechanical Interchangeability of Refractors |
Stabilized Maintenance |
Richmond, David |
|
Published |
|
| ANSI C136.28-2006 (R2011, S2017) |
Glass Lenses Used in Luminaires |
Stabilized Maintenance |
Richmond, David |
|
Published |
|
| TC 19-2017 |
Riser U-Type Guards |
Technical Revision |
Richmond, David |
|
Published |
|
| ICS 7.1-2012 |
Safety Standards for Construction and Guide for Selection, Installation, & Operation of Adjustable-Speed Drive Systems |
Technical Revision |
Richmond, David |
2017-12-31 |
|
|
| CB 1-2000 R(2012) |
Brushes for Electrical Machines (reinstatement of previously rescinded standard) |
Reaffirmation |
Masri, Khaled |
2017-12-31 |
|
|
| ANSI/ICEA S-86-634-2011 (R2017) |
Buried Distribution & Service Wire, Filled Polyolefin Insulated Copper Conductor |
Reaffirmation |
Masri, Khaled |
2017-04-26 |
|
|
| HP 8 2012 |
Electrical and Electronic Crosslink |
Revision |
Masri, Khaled |
2017-12-31 |
|
|
| HP 6-2012 |
Electrical and Electronic Silicone and Silicone-Braided Insulted Hook-up Wire Types S (600 V), ZHS (600 V), SS (1000 V), ZHSS (1000 V), and SSB Braided (1000 V) |
Revision |
Masri, Khaled |
2017-12-31 |
|
|
| ANSI/ICEA S-75-381-2017/NEMA WC 58-2017 |
Portable and Power Feeder Cables for Use in Mines and Similar Applications |
Technical Revision |
Masri, Khaled |
2017-08-15 |
|
|
| ANSI ICEA S-122-744-2016 |
STANDARD FOR OPTICAL FIBER OUTSIDE PLANT MICRODUCT CABLES |
New |
Masri, Khaled |
2017-01-06 |
|
|
| ANSII/ICEA T-32-645-2017 |
Test Method for Establishing Volume Resistivity Compatibility of Water Blocking Components with Extruded Semiconducting Shield Materials |
New |
Masri, Khaled |
2017-02-23 |
|
|
| ICS 5 Annex F - 2002 (R2007, R2012) |
High Pressure Power Wash Procedures for Self-Contained Control-Circuit Devices |
Reaffirmation |
Leibowitz, Mike |
2017-12-31 |
|
|
| ICS 2.4-2003 (R2012) |
NEMA and IEC Devices for Motor Service - A Guide for Understanding the Differences (reinstatement of former ICS 2.4-1980) |
Reaffirmation |
Leibowitz, Mike |
2017-12-31 |
|
|
| MG 2-2012 |
Safety Standard for Construction and Guide for Selection, Installation, and Use of Electric Motors and Generators |
Technical Revision |
Leibowitz, Mike |
2017-12-31 |
|
|
| ANSI C82.4-2017 |
Ballasts for High-Intensity Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type) |
Revision |
Erbesfeld, Michael |
2017-08-17 |
|
|
| ANSI C82.17-2017 |
For High Frequency Electronic Ballasts for Metal Halide Lamps |
New |
Erbesfeld, Michael |
2017-08-11 |
|
|
| ANSI C82.9-2016 |
HID Definitions |
Revision |
Erbesfeld, Michael |
2017-02-06 |
|
|
| ANSI C78.380-2016 |
High-Intensity Discharge Lamps, Method of Designation |
Revision |
Erbesfeld, Michael |
2017-01-11 |
|
|
| ANSI C82.11-2017 |
Lamp Ballast - Line Frequency Fluorescent Lamp Ballast |
Revision |
Erbesfeld, Michael |
2017-06-22 |
|
|
| ANSI C82.14-2016 |
Low Frequency Square Wave Ballasts for Metal Halide Lamps |
Revision |
Erbesfeld, Michael |
2017-03-31 |
|
|
| ANSI C137.3-2017 |
Minimum Requirements for installation of Energy Efficient Power over Ethernet (PoE) Lighting Systems |
New |
Erbesfeld, Michael |
2017-05-25 |
|
|
| ANSI C82.5-2016 |
Reference Ballasts - High-Intensity-Discharge and Low-Pressure Sodium Lamps |
Revision |
Erbesfeld, Michael |
2017-03-31 |
|
|
| ANSI C78.901-2016 |
Single-Base Fluorescent Lamps--Dimensional and Electrical Characteristics |
Revision |
Erbesfeld, Michael |
2017-03-30 |
|
|
| ANSI Z535.2-2011 (R2017) |
Environmental and Facility Signs |
Reaffirmation |
Crampton, Paul |
2017-10-18 |
|
|
| ANSI Z535.6-2011 (R2017) |
Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials |
Reaffirmation |
Crampton, Paul |
2017-10-27 |
|
|
| ANSI Z535.4-2011 (R2017) |
Product Safety Signs and Labels |
Reaffirmation |
Crampton, Paul |
2017-10-20 |
|
|
| ANSI C29.8-2017 |
Wet Process Porcelain Insulators - Apparatus, Cap and Pin Type |
Technical Revision |
Crampton, Paul |
2017-08-18 |
|
|
| ANSI C29.9-2017 |
Wet Process Porcelain Insulators - Apparatus, Post Type |
Technical Revision |
Crampton, Paul |
2017-09-19 |
|
|
| ANSI C29.10-2017 |
Wet Process Porcelain Insulators - Indoor Apparatus Type |
Technical Revision |
Crampton, Paul |
2017-08-18 |
|
|
| OS 4-2016 |
Requirements for Air Sealed Boxes for Electrical and Communication Applications |
Technical Revision |
Abbate, Daniel |
2017-04-11 |
|
|
| OS 3-2016 |
Selection and Installation Guidelines for Electrical Outlet Boxes |
Technical Revision |
Abbate, Daniel |
2017-04-17 |
|
|